Crawler Skid-Excavators
The speed of a loader...
Combined with the rotation of an excavator
Switch to Speed
That’s Mecalac unique innovation in motion.
100% faster than any small excavator
MCRs are fast and efficient. You can travel up to 10km/h (6.2mph), which is 2x faster than any small excavator. Considering all the time spent by small excavators traveling across the jobsite, this translates automatically into shorter cycle times, and less non added-value moments for co-workers waiting for the excavator to arrive.
Moving up to 0.75m³ at 10km/h
MCRs are not only about going fast. They are about being able to move more m³ AND faster than any traditional excavator. Our hydrostatic transmission motors are strong enough to take on any job. Resting the bucket against the blade ensures there is no constraints on the boom and stick.
Switch to Productivity
Move more at each bucket
The right bucket size For fast works.
Would you keep your 0.30 m3 (0.39 yd3) bucket if you could use a 0.53 m3 (0.69 yd3) one?
Equip your MCR with a skid bucket to reduce the number of passes needed for loading a truck, or to spread the dirt directly into the trench while moving forward to refill it. Not mentionning site finitions: There is nothing quicker and easier than being able to fine grade the ground level like a compact loader. This is another example of how you can reduce drastically your total cycle times.
You need to push big loads? Not an issue!
Place the skid bucket against the blade and push; the force from the undercarriage is transmitted directly to the bucket, thus increasing your loading capacities.
Switch to 360° Compactness
Why would you invest in something smaller if it is still cumbersome?
When you work in a tight congested worksite, it’s tight. Not only at the rear, but all around. It’s the same for our excavators; they are compact, at the back but also and above all at the front. It’s only with a true 360° compactness that you can get the full advantages of a compact machine that are the maneuverability and also the stability. When you can pull the boom fully backwards, there is no weight at the front that makes you loose balance.
8MCR in action
Features
| Total operating weight | 7200 kg (15,900 lb) / 7600 kg (16,755 lb) | |
|---|---|---|
| Tail swing radius | 1254 mm (4’1”) | |
| Turning width | 2698 mm (8’10”) | |
| Engine power (kW/hp) | 55,4 kW (75hp - 74.3 imperial hp) | |
| Travel speed | 10 km/h (6.2 mph) | |
| Motorisation | Deutz | |
| Max. depth | - 3700 mm (12’1”) | |
| Tear-out force / Excavator | 2800 daN (6,300 lbf) | |
| Break-out force / Excavator | 5000 daN (11,240 lbf) | |
| Bucket volumes | 0,53m³ (0.69yd³) | |
| + and - with forks | + 5200 mm (+17’05”) / - 3000 mm (-9’10”) |
Array
(
[market_alert] =>
[ref] => 8MCR
[title] => 8MCR
[catchphrase] => The speed of a loader...
Combined with the rotation of an excavator
[description] =>
[legal_notice] => MECALAC | 8MCR, New Crawler Skid-Excavator, compact and innovative!
[alt_label_1] =>
[alt_content_1] =>
[alt_label_2] =>
[alt_content_2] =>
[financial_title] =>
[financial_catchphrase] =>
[financial_monthly_payment] =>
[financial_net_price] =>
[financial_legal] =>
[media] => 1554487633_star-mecalac-mcr-series-mark-ii-png.png
[medias] => Array
(
[Job site] => Array
(
[0] => Array
(
[id] => 7841
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-6-Copyright_Mecalac-72dpi-web-7841.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-6-Copyright_Mecalac-72dpi-web-7841.jpg
[shareable] => 1
)
[1] => Array
(
[id] => 7837
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-1-Copyright_Mecalac-72dpi-web-7837.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-1-Copyright_Mecalac-72dpi-web-7837.jpg
[shareable] => 1
)
[2] => Array
(
[id] => 7838
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-2-Copyright_Mecalac-72dpi-web-7838.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-2-Copyright_Mecalac-72dpi-web-7838.jpg
[shareable] => 1
)
[3] => Array
(
[id] => 7839
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-3-Copyright_Mecalac-72dpi-web-7839.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-3-Copyright_Mecalac-72dpi-web-7839.jpg
[shareable] => 1
)
[4] => Array
(
[id] => 7840
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-4-Copyright_Mecalac-72dpi-web-7840.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-4-Copyright_Mecalac-72dpi-web-7840.jpg
[shareable] => 1
)
[5] => Array
(
[id] => 7836
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-TA3SH_and_8MCR-Job_site-5-Copyright_Mecalac-72dpi-web-7836.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-TA3SH_and_8MCR-Job_site-5-Copyright_Mecalac-72dpi-web-7836.jpg
[shareable] => 1
)
[6] => Array
(
[id] => 7739
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_TA3SH-Job_site-2-Copyright_Mecalac-72dpi-web-7739.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_TA3SH-Job_site-2-Copyright_Mecalac-72dpi-web-7739.jpg
[shareable] => 1
)
[7] => Array
(
[id] => 7740
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_TA3SH-Job_site-3-Copyright_Mecalac-72dpi-web-7740.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_TA3SH-Job_site-3-Copyright_Mecalac-72dpi-web-7740.jpg
[shareable] => 1
)
[8] => Array
(
[id] => 7741
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_TA3SH-Job_site-1-Copyright_Mecalac-72dpi-web-7741.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_TA3SH-Job_site-1-Copyright_Mecalac-72dpi-web-7741.jpg
[shareable] => 1
)
[9] => Array
(
[id] => 7743
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-23-Copyright_Mecalac-72dpi-web-7743.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-23-Copyright_Mecalac-72dpi-web-7743.jpg
[shareable] => 1
)
[10] => Array
(
[id] => 7742
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-24-Copyright_Mecalac-72dpi-web-7742.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-24-Copyright_Mecalac-72dpi-web-7742.jpg
[shareable] => 1
)
[11] => Array
(
[id] => 7744
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-25-Copyright_Mecalac-72dpi-web-7744.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-25-Copyright_Mecalac-72dpi-web-7744.jpg
[shareable] => 1
)
[12] => Array
(
[id] => 4785
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-22-Copyright_Plant_and_Civil_Engineer-72dpi-web-4785.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-22-Copyright_Plant_and_Civil_Engineer-72dpi-web-4785.jpg
[shareable] => 1
)
[13] => Array
(
[id] => 4786
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-21-Copyright_Plant_and_Civil_Engineer-72dpi-web-4786.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-21-Copyright_Plant_and_Civil_Engineer-72dpi-web-4786.jpg
[shareable] => 1
)
[14] => Array
(
[id] => 4782
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-20-Copyright_Plant_and_Civil_Engineer-72dpi-web-4782.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-20-Copyright_Plant_and_Civil_Engineer-72dpi-web-4782.jpg
[shareable] => 1
)
[15] => Array
(
[id] => 4779
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-19-Copyright_Plant_and_Civil_Engineer-72dpi-web-4779.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-19-Copyright_Plant_and_Civil_Engineer-72dpi-web-4779.jpg
[shareable] => 1
)
[16] => Array
(
[id] => 457
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-18-Copyright_Mecalac-72dpi-web-457.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-18-Copyright_Mecalac-72dpi-web-457.jpg
[shareable] => 1
)
[17] => Array
(
[id] => 451
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-17-Copyright_Mecalac-72dpi-web-451.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-17-Copyright_Mecalac-72dpi-web-451.jpg
[shareable] => 1
)
[18] => Array
(
[id] => 446
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-16-Copyright_Mecalac-72dpi-web-446.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-16-Copyright_Mecalac-72dpi-web-446.jpg
[shareable] => 1
)
[19] => Array
(
[id] => 462
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-15-Copyright_Mecalac-72dpi-web-462.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-15-Copyright_Mecalac-72dpi-web-462.jpg
[shareable] => 1
)
[20] => Array
(
[id] => 470
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-14-Copyright_Mecalac-72dpi-web-470.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-14-Copyright_Mecalac-72dpi-web-470.jpg
[shareable] => 1
)
[21] => Array
(
[id] => 475
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-13-Copyright_Mecalac-72dpi-web-475.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-13-Copyright_Mecalac-72dpi-web-475.jpg
[shareable] => 1
)
[22] => Array
(
[id] => 459
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-12-Copyright_Mecalac-72dpi-web-459.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-12-Copyright_Mecalac-72dpi-web-459.jpg
[shareable] => 1
)
[23] => Array
(
[id] => 473
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-11-Copyright_Mecalac-72dpi-web-473.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-11-Copyright_Mecalac-72dpi-web-473.jpg
[shareable] => 1
)
[24] => Array
(
[id] => 448
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-10-Copyright_Mecalac-72dpi-web-448.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-10-Copyright_Mecalac-72dpi-web-448.jpg
[shareable] => 1
)
[25] => Array
(
[id] => 454
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-9-Copyright_Mecalac-72dpi-web-454.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-9-Copyright_Mecalac-72dpi-web-454.jpg
[shareable] => 1
)
[26] => Array
(
[id] => 458
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-8-Copyright_Mecalac-72dpi-web-458.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-8-Copyright_Mecalac-72dpi-web-458.jpg
[shareable] => 1
)
[27] => Array
(
[id] => 460
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-7-Copyright_Mecalac-72dpi-web-460.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-7-Copyright_Mecalac-72dpi-web-460.jpg
[shareable] => 1
)
[28] => Array
(
[id] => 455
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-6-Copyright_Mecalac-72dpi-web-455.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-6-Copyright_Mecalac-72dpi-web-455.jpg
[shareable] => 1
)
[29] => Array
(
[id] => 452
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-5-Copyright_Mecalac-72dpi-web-452.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-5-Copyright_Mecalac-72dpi-web-452.jpg
[shareable] => 1
)
[30] => Array
(
[id] => 468
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-4-Copyright_Mecalac-72dpi-web-468.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-4-Copyright_Mecalac-72dpi-web-468.jpg
[shareable] => 1
)
[31] => Array
(
[id] => 476
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-3-Copyright_Mecalac-72dpi-web-476.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-3-Copyright_Mecalac-72dpi-web-476.jpg
[shareable] => 1
)
[32] => Array
(
[id] => 478
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-2-Copyright_Mecalac-72dpi-web-478.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-2-Copyright_Mecalac-72dpi-web-478.jpg
[shareable] => 1
)
[33] => Array
(
[id] => 464
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Job_site-1-Copyright_Mecalac-72dpi-web-464.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Job_site-1-Copyright_Mecalac-72dpi-web-464.jpg
[shareable] => 1
)
[34] => Array
(
[id] => 4780
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-5-Copyright_Plant_and_Civil_Engineer-72dpi-web-4780.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-5-Copyright_Plant_and_Civil_Engineer-72dpi-web-4780.jpg
[shareable] => 1
)
[35] => Array
(
[id] => 4781
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-4-Copyright_Plant_and_Civil_Engineer-72dpi-web-4781.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-4-Copyright_Plant_and_Civil_Engineer-72dpi-web-4781.jpg
[shareable] => 1
)
[36] => Array
(
[id] => 4783
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-3-Copyright_Plant_and_Civil_Engineer-72dpi-web-4783.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-3-Copyright_Plant_and_Civil_Engineer-72dpi-web-4783.jpg
[shareable] => 1
)
[37] => Array
(
[id] => 4784
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-2-Copyright_Plant_and_Civil_Engineer-72dpi-web-4784.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-2-Copyright_Plant_and_Civil_Engineer-72dpi-web-4784.jpg
[shareable] => 1
)
[38] => Array
(
[id] => 453
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-1-Copyright_Mecalac-72dpi-web-453.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-1-Copyright_Mecalac-72dpi-web-453.jpg
[shareable] => 1
)
[39] => Array
(
[id] => 4769
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR_and_6MDX-Job_site-1-Copyright_Mecalac-72dpi-web-4769.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR_and_6MDX-Job_site-1-Copyright_Mecalac-72dpi-web-4769.jpg
[shareable] => 1
)
[40] => Array
(
[id] => 4796
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-9MWR_and_8MCR-Job_site-1-Copyright_Plant_and_Civil_Engineer-72dpi-web-4796.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-9MWR_and_8MCR-Job_site-1-Copyright_Plant_and_Civil_Engineer-72dpi-web-4796.jpg
[shareable] => 1
)
[41] => Array
(
[id] => 4499
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-6MDX_8MCR-Job_site-1-Copyright_Plant_and_Civil_Engineer-72dpi-web-4499.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-6MDX_8MCR-Job_site-1-Copyright_Plant_and_Civil_Engineer-72dpi-web-4499.jpg
[shareable] => 1
)
[42] => Array
(
[id] => 4489
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-6MDX_8MCR-Job_site-2-Copyright_Plant_and_Civil_Engineer-72dpi-web-4489.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-6MDX_8MCR-Job_site-2-Copyright_Plant_and_Civil_Engineer-72dpi-web-4489.jpg
[shareable] => 1
)
[43] => Array
(
[id] => 4497
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-6MDX_8MCR-Job_site-3-Copyright_Plant_and_Civil_Engineer-72dpi-web-4497.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-6MDX_8MCR-Job_site-3-Copyright_Plant_and_Civil_Engineer-72dpi-web-4497.jpg
[shareable] => 1
)
[44] => Array
(
[id] => 4486
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-6MDX_8MCR-Job_site-4-Copyright_Plant_and_Civil_Engineer-72dpi-web-4486.jpg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-6MDX_8MCR-Job_site-4-Copyright_Plant_and_Civil_Engineer-72dpi-web-4486.jpg
[shareable] => 1
)
)
[Star] => Array
(
[0] => Array
(
[id] => 477
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-12-Copyright_Semaphore-72dpi-web-Back_left_skid-477.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-12-Copyright_Semaphore-72dpi-web-Back_left_skid-477.png
[shareable] => 1
)
[1] => Array
(
[id] => 463
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-11-Copyright_Semaphore-72dpi-web-Back_right_skid-463.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-11-Copyright_Semaphore-72dpi-web-Back_right_skid-463.png
[shareable] => 1
)
[2] => Array
(
[id] => 449
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-10-Copyright_Semaphore-72dpi-web-Back_left_excavator-449.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-10-Copyright_Semaphore-72dpi-web-Back_left_excavator-449.png
[shareable] => 1
)
[3] => Array
(
[id] => 474
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-9-Copyright_Semaphore-72dpi-web-Back_right_excavator-474.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-9-Copyright_Semaphore-72dpi-web-Back_right_excavator-474.png
[shareable] => 1
)
[4] => Array
(
[id] => 466
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-8-Copyright_Semaphore-72dpi-web-Front_left_skid-466.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-8-Copyright_Semaphore-72dpi-web-Front_left_skid-466.png
[shareable] => 1
)
[5] => Array
(
[id] => 479
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-7-Copyright_Semaphore-72dpi-skid-Front_right_skid-479.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-7-Copyright_Semaphore-72dpi-skid-Front_right_skid-479.png
[shareable] => 1
)
[6] => Array
(
[id] => 461
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-6-Copyright_Semaphore-72dpi-web-Front_lelft_excavator-461.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-6-Copyright_Semaphore-72dpi-web-Front_lelft_excavator-461.png
[shareable] => 1
)
[7] => Array
(
[id] => 472
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-5-Copyright_Semaphore-72dpi-web-Front_right_excavator-472.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-5-Copyright_Semaphore-72dpi-web-Front_right_excavator-472.png
[shareable] => 1
)
[8] => Array
(
[id] => 450
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-4-Copyright_Semaphore-72dpi-web-Left_profile_skid-450.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-4-Copyright_Semaphore-72dpi-web-Left_profile_skid-450.png
[shareable] => 1
)
[9] => Array
(
[id] => 467
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-3-Copyright_Semaphore-72dpi-web-Left_profile_excavator-467.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-3-Copyright_Semaphore-72dpi-web-Left_profile_excavator-467.png
[shareable] => 1
)
[10] => Array
(
[id] => 447
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-2-Copyright_Semaphore-72dpi-web-Right_profile_skid-447.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-2-Copyright_Semaphore-72dpi-web-Right_profile_skid-447.png
[shareable] => 1
)
[11] => Array
(
[id] => 480
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Star-1-Copyright_Semaphore-72dpi-web-Right_profile_excavator-480.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Star-1-Copyright_Semaphore-72dpi-web-Right_profile_excavator-480.png
[shareable] => 1
)
)
[Aerial vue] => Array
(
[0] => Array
(
[id] => 4978
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Aerial_vue-4-Copyright_Semaphore-72dpi-web-Loading-4978.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Aerial_vue-4-Copyright_Semaphore-72dpi-web-Loading-4978.png
[shareable] => 1
)
[1] => Array
(
[id] => 4991
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Aerial_vue-3-Copyright_Semaphore-72dpi-web-Offset-4991.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Aerial_vue-3-Copyright_Semaphore-72dpi-web-Offset-4991.png
[shareable] => 1
)
[2] => Array
(
[id] => 4990
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Aerial_vue-2-Copyright_Semaphore-72dpi-web-Compactness-4990.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Aerial_vue-2-Copyright_Semaphore-72dpi-web-Compactness-4990.png
[shareable] => 1
)
[3] => Array
(
[id] => 4982
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/MECALAC-8MCR-Aerial_vue-1-Copyright_Semaphore-72dpi-web-Compactness-4982.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/MECALAC-8MCR-Aerial_vue-1-Copyright_Semaphore-72dpi-web-Compactness-4982.png
[shareable] => 1
)
)
[forCatalog] => Array
(
[picto] => Array
(
[0] => Array
(
[id] => 5993
[node_media] => https://box5.mecalac.com/medias/thumbs/svg/8mcr-mark2-5993.svg
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/svg/8mcr-mark2-5993.svg
[shareable] => 1
)
)
[] => Array
(
[0] => Array
(
[id] => 5903
[node_media] => https://box5.mecalac.com/medias/thumbs/thumbs-800/mecalac-8mcr-mark2-godet-l-5903.png
[node_video] =>
[node_thumb] => https://box5.mecalac.com/medias/thumbs/thumbs-400/mecalac-8mcr-mark2-godet-l-5903.png
[shareable] => 1
)
)
)
)
[all_medias] =>
[docs] => Array
(
[0] => Array
(
[id] => 5182
[type] => Leaflet
[label] => MCR SERIE
[thumb] => MECALAC-Leaflet-MCR_SERIE-MCR-MK375-EN-web-5182.jpg
[file] => MECALAC-Leaflet-MCR_SERIE-MCR-MK375-EN-web.pdf
)
[1] => Array
(
[id] => 10399
[type] => Leaflet
[label] => Tiltrotator MR40 MR50 MR60
[thumb] => MECALAC-Leaflet-Tiltrotator_MR40_MR50_MR60-MR40_MR50_MR60_MWR_MCR_MC_12Series-MK399-EN-web-10399.jpg
[file] => MECALAC-Leaflet-Tiltrotator_MR40_MR50_MR60-MR40_MR50_MR60_MWR_MCR_MC_12Series-MK399-EN-web.pdf
)
)
[skus] => Array
(
[0] => Array
(
[id] => 710
[id_externe] => 8MCR2
[id_financing] => 8MCR
[id_modele] => 333
[id_couleur] =>
[id_taille] =>
[position] =>
[ref] => 8MCR2
[prix_achat] => 0.00
[prix_vente] => 0.00
[prix_solde] => 0.00
[prix_promo] =>
[prix_destockage] =>
[id_tva] =>
[stock] => 0
[is_nouveaute] => 1
[is_configurable] => 1
[mbuilder_display] => 1
[cfg_vd] => EX
[is_solde] => 0
[remise_solde] => 0
[is_indisponible] => 0
[stock_fournisseur] => 0
[delai_disponibilite] => 0
[poids_livraison] => 0
[poids] => 0
[dimension_hauteur] => 0
[dimension_longeur] => 0
[dimension_largeur] => 0
[dimension_diametre] => 0
[libelle_externe] =>
[collection] =>
[code_ean] =>
[code_douanier] =>
[pays_origine_id] =>
[markets] => EAO,EU,NA_MNA,SA,UK
[valid] => 1
[statut] => valide
[created] => 2019-03-20T11:34:10+00:00
[modified] => 2022-07-13T11:27:15+00:00
[_translations] => Array
(
[fr] => Array
(
[alt_content_1] =>
[alt_content_2] => CHÂSSIS
CHÂSSIS structure en X , chenilles caoutchouc 450mm (18 in).
TRANSMISSION HYDROSTATIQUE INDÉPENDANTE à circuit fermé. Senso Drive.
2 MOTO-RÉDUCTEURS À 2 VITESSES AUTOMATIQUES: 5 km/h et 10 km/h (3 mph - 6.2 mph), freins automatiques.
AMORTISSEUR DE TENSION DE CHAÎNE par ressort avec réglage de tension par système pot à graisse.
LAME, système breveté de reprise des efforts induits par le godet skid/4x1 (origine Mecalac) sur la lame en phase de chargement ou de décapage.
MOTEUR
MOTEUR DEUTZ TCD 2,9L 55 kW (75 hp), 4 cylindres, refroidissement par eau,
turbo compressé, Conforme aux normes d’émissions EU Stage V et U.S EPA Tier 4
Final. Avec valve EGR (recirculation des gaz), DOC (catalyseur d’oxydation
diesel) et DPF (filtre à particules Diesel). Pas de SCR, pas de AdBlue.
MISE A BAS
REGIME: Réduit la vitesse moteur automatiquement si aucune fonction n'est
engagée.
HYDRAULIQUE
BLOC DISTRIBUTEUR hydraulique de type 7SX12, Active Control, avec "Load Sensing" et "Flow Sharing".
POMPE D'ÉQUIPEMENT, à cylindrée variable Rexroth 63 cm3 (3.8 in³), dédiée à l'équipement et rotation.
POMPE DOUBLE DE TRANSLATION: Rexroth, à cylindrée variable, 2x 45 cm3 (2x 2.7 in³).
MOTEUR HYDRAULIQUE D'ORIENTATION LENT: avec frein automatique à disques et valve amortie, pour rotation totale à 360° de la tourelle.
EQUIPEMENT
FLECHE A CINEMATIQUE MECALAC, à volée variable en 3 parties, déport inclus.
DEPORT, hydraulique.
BALANCIER: 1800 mm (5'10.8")
LIGNE HYDRAULIQUE AUXILIAIRE PRINCIPALE, proportionnelle (commande proportionnelle intégrée au manipulateur droit).
FONCTION DÉBIT CONTINU, pour les outils à mouvement continu.
SYSTÈME D'ATTACHE RAPIDE RÉVERSIBLE BREVETÉ CONNECT sans crochet, pour godets et accessoires mécaniques, commandé depuis la cabine (lignes hydrauliques et circuit inclus).
CLAPET DE SECURITE: Vérin de flèche équipé d'un clapet de sécurité.
Buzzer avertisseur de surcharge en standard avec les options 3 ou 4 clapets de sécurité.
MODES DE TRAVAIL BREVETES
3 MODES DE TRAVAIL: Parking - Pelle - Chargeur permettant d'adapter automatiquement les fonctionnalités de la machine au type d'utilisation.
LE MODE PARKING active les freins de parc et verrouille l'ensemble des commandes de la machine.
LE MODE PELLE permet de conduire la machine comme une pelle :
- Manipulateur gauche: Rotation tourelle et commande balancier.
- Manipulateur droit: Commande de la flèche ou du bec et du godet.
LE MODE CHARGEUR permet de conduire la machine comme une chargeuse compacte sur chenilles :
- Manipulateur gauche: Translation et contre-rotation.
- Manipulateur droit: Commande du levage (bec de flèche) et du godet.
Récupération de la rotation tourelle avec le manipulateur gauche.
Possibilité de personnaliser tous les modes et commandes via une seule interface avancée (molette).
FONCTIONS INDÉPENDANTES D'AIDE AU TRAVAIL
LA FONCTION COUPLAGE VERINS combine simultanément les mouvements des vérins de balancier et bec de flèche pour permettre une conduite similaire à celle d'une pelle avec flèche monobloc.
LA FONCTION INVERSION SENS GODET permet d'inverser le sens d'ouverture et de fermeture du godet au manipulateur droit afin de retrouver le sens de commande d'une chargeuse.
GESTION DU REGIME MOTEUR, par potentiomètre contrôlant directement le système d'injection du moteur thermique.
LIMITEUR DE VITESSE: fonction de gestion de la vitesse au sol. Permet de définir une vitesse maximum, de la plus faible à la vitesse maximum de la machine.
GRAISSAGE REGROUPE MANUEL: points de graissage de la tourelle seule regroupés au même endroit.
CABINE
Rétroviseurs droit et gauche, un phare de travail avant,
Cabine panoramique grand confort, à visibilité non obstruée à 360°. Homologuée ROPS FOPS (grille FOPS Niveau II sur fenêtre de toit en standard),
Pare-brise avant escamotable dans sa totalité et partiellement, pare-soleil pare-brise et/ou vitre toit.
Chauffage à eau conforme à la norme ISO 10263, avec plusieurs aérateurs indépendants,
Console de gauche inclinable,
Siège confortable ajustable à la morphologie du chauffeur,
Réglage indépendant des consoles supports manipulateurs,
Commandes assistées par manipulateurs ergonomiques proportionnels,
Monitoring électronique pour vérification immédiate du bon fonctionnement des fonctions de sécurité et machine,
Ecran couleur VGA 7" avec visuels paramétrage machine, indications visuelles et alarme sonore de sécurité. Ajustement et enregistrement des débits outils,
Niveaux gasoil, témoins pour changement de filtres ou non fonctionnement,
Interface de commandes intuitives souples, molette encodeur, bouton démarrage,
Prédisposition pour installation d'une radio,
Filtre à air cabine et boîte à fusibles,
GARANTIE2 ans / 3000 heures de garantie, sous réserve des conditions suivantes :- Plan d’entretien MECALAC respecté et réalisé dans le réseau agréé MECALAC- Utilisation de pièces détachées MECALAC d’origine (y compris Filtration et Lubrifiants**) et réalisation des analyses lubrifiants.
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Bras Polyvalent Mecalac
[locale] => fr
)
[en] => Array
(
[alt_content_1] =>
[alt_content_2] =>
UNDERCARRIAGE
CHASSIS: Central X-frame undercarriage, 450mm (18 in) rubber tracks.
INDEPENDENT HYDROSTATIC TRANSMISSION, closed-circuit, Senso Drive.
TWO AUTOMATIC SHIFT 2-SPEED TRAVEL MOTORS: 5 kph -10 kph (3 mph - 6.2 mph), with automatic brakes.
IDLER BLOCK, with tension adjustment through greasing point.
BLADE, with patented system to absorb the constraints induced by the Mecalac skid & 4X1 buckets when loading or scraping.
ENGINE
DEUTZ TCD
2.9L 55kW (75Hp) engine, 4 cylinders, Water cooled, Turbocharged engine.
Meets both EU Stage V and US EPA Tier 4 Final emission standards. With EGR
valve (recirculation system), DOC (Diesel Oxidation Catalyst) and DPF (Diesel
Particulate Filter). No SCR, no AdBlue.
AUTO ENGINE IDLE : Automatically reduces the engine speed
when no function is required.
HYDRAULICS
MAIN VALVE BLOCK: Active Control, with Load Sensing and Flow Sharing, 7SX12-type hydraulic distributor.
MAIN HYDRAULIC PUMP: Rexroth variable displacement pump (swing, boom/stick, working circuit), 63 cm³ (3.8 in³).
2 TRANSMISSION PUMPS: Rexroth variable displacement pumps, 2x 45 cm³ (2x 2.7 in³).
HYDRAULIC 360° SWING MOTOR: with automatic brake by disks equipped with anti-bounce pressure relief valve.
BOOM AND STICK
MECALAC BOOM KINEMATICS, 3-part variable adjustment boom, incl. offset boom.
OFFSET BOOM, hydraulic.
STICK: 1800 mm (5'10.8").
MAIN AUXILIARY HYDRAULIC LINE, proportional (proportional control integrated into the right joystick).
PERMANENT FLOW function for tools with a continuous movement.
PATENTED CONNECT REVERSIBLE HYDRAULIC QUICK COUPLER system, no hook, to mount buckets and tools from the cab (hydraulic lines and circuit included).
1x ANTI-DROP SAFETY VALVE on boom.
Standard overload alarm with the 3 or 4 safety anti-drop valves options.
PATENTED OPERATING MODES
3 OPERATING MODES: Parking - Excavator - Compact Loader modes setting automatically the machine functions to the intended use.
THE PARKING MODE activates the parking brake and deactivates all driving and working functions.
THE EXCAVATOR MODE enables the machine to be operated like an excavator:
- Left joystick: swing and dipper stick control,
- Right joystick: boom or adjustable boom and bucket control.
THE LOADER MODE enables the machine to be operated like a compact track loader:
- Left joystick: transmission and counter-rotations,
- Right joystick: Lifting (intermediate boom) and bucket control.
Swing «recovery» capability with the left joystick
Possibility to CUSTOMIZE all user modes and control devices via one unique advanced user interface (rotary switch).
WORK ASSISTANCE, INDEPENDENT FUNCTIONS:
CYLINDERS COUPLING FUNCTION: simultaneously combines the stick and intermediate boom cylinders to allow a simplified operation of the front linkage, identical to an excavator that would be equipped with a monoboom.
BUCKET CONTROL INVERSION: enables the operator to reverse the bucket opening/closing controls of the right joystick when the bucket is in reversed position: allows the operator not to change his/her operating habits.
ENGINE SPEED CONTROL, by encoder.
SPEED CONTROL: travel speed management function. Allows for setting a maximum travel speed, from very slow to the machine maximum speed.
MANUAL GREASING UNIT, CENTRALIZED: upperframe grease points located at the same place.
CAB
Left and right mirrors, 1x front work light,
Comfortble cab, panoramic, with all-around visibility. FOPS-ROPS certified (FOPS level II guard on roof window is standard),
Front windshield, completely or partially retractable, sunshade for windshield and/or cab roof window,
Water heating system, meets ISO 10263 standards, with several independent air vents,
Left tilting console,
Comfortable seat, adjustable to the driver’s morphology. Lumbar adjustment,
Independent adjustment of the joystick consoles,
Controls assited by proportional ergonomic joysticks,
Electronic monitor for immediate checking of safety devices and machine functions,
7’’ VGA color screen monitor combining machine parameters, warning indicators and alarm. Work tools flows can be set and recorded from the monitor,
Diesel level gauge, indicators for filter replacement or system failures,
Soft-buttons panel, intuitive, jog-dial, start button,
Preparation for radio intallation,
Cab air filter and fuse box,
WARRANTY
2 years
warranty /3000 hours
-
MECALAC maintenance plan respected and carried out in the MECALAC approved
network.
- Use of
original MECALAC spare parts (including Filtration and Lubricants**) and
lubricant analysis.
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Versatile Mecalac attachment
[locale] => en
)
[de] => Array
(
[alt_content_1] =>
[alt_content_2] => UNTERWAGEN
in verwindungssteifer X-Bauweise. Gummi-Raupenkette 450 mm. Hydrostatischer Fahrantrieb mit geschlossenemKreislauf. Senso Drive. 2 zweistufige automatische Getriebe : bis 5 km/h und 10 km/h ,Automatische BetriebsbremsenKettendämpfung mit federbeaufschlagtem Fett-Kettenspanner Planierschild.Planierschild mit patentiertem System zur Aufnahme von Kräften über dieMecalac Ladeschaufel/Skidschaufel/Mehrzweckschaufel beimLaden oder Planieren.MOTOR
DEUTZ TCD 2.9L 55 kW (75 PS) Motor, 4 Zylinder, wassergekühlt,
Turbolader-Motor. Erfüllt sowohl die EU Stage V als auch die US EPA Tier 4
Final Emissionsstandards. Mit EGR-Ventil (Abgasrückführungssystem), DOC
(Dieseloxidationskatalysator) und DPF (Dieselpartikelfilter). Kein SCR, kein
AdBlue.
LEERLAUFAUTOMATIK: senkt die Motordrehzahl ab, wenn keine Funktion
angesprochen.
FAHRDOPPELPUMPE Rexroth, (45 cm3 x 2),Drehmotor zur 360°-Drehung des Oberwagens mit Hydrosensor©-Ausgleichsventil zur Dämpfung des SchwenkwerksArbeitspumpe Rexroth mit variablem Hubraum, 63 cm3. Arbeitshydraulik mit Load Sensing "Flow Sharing" Steuerblock 7SX12.Active Control.4-TEILIGER VERSTELLAUSLEGER und Stiel; Seitenversatz Serie;Auslegerzylinder mit 1 Rohrbruch-Sicherheitsventil;Reversibler und patentierter Mecalac-Schnellwechsler (hydr.) CONNECTVorbereitung für Zusatzhydraulik inkl.Verrohrung am Löffelstiel (kein Lasthaken). Standard Überlastwarnanzeige mit 3 oder 4Rohrbruch-Sicherheitsventile.Bedienung der Zusatzhydraulik über eine proportionale Ansteuerung aufdem rechten JoystickPatentiertes System zur Bedienung der Maschine Baggermodus oder LadermodusARBEITSMODI:- Baggermodus zur Bedienung der Maschine wie ein Bagger:Drehung des Oberwagens und Bedienung Löffelstiel über linken JoystickBedienung Ausleger oder Verstellausleger und Löffel über rechten Joystick- Ladermodus zur Bedienung der Maschine wie ein Kompakt-Raupenlader:Laufwerk (vor/zurück, links/rechts) über linken JoystickHubwerk (Verstellausleger) und Löffel über rechten JoystickUNABHÄNGIGE FUNKTIONEN zur Arbeitserleichterung:- Zylinderkopplung zur simultanen Bedienung des Verstellzylinders unddes Löffelstielzylinders mit einer Bewegung des Joysticks, Bedienung derMaschine wie mit einem Monoblock-Ausleger- Schaufelumkehr ermöglicht die Umkehr von Öffnen und Schliessen derSchaufel zur Bedienung wie bei einem KompaktladerEinstellung der Motordrehzahl über einen Potentiometer, direkt auf dasEinspritzsystem des Dieselmotors agierendZUSAMMENGEFASSTE SCHMIERSTELLEN DES OBERWAGENSKABINE, bequem, ROPS FOPS Zertifiziert, mit:Ein Arbeitsscheinwerfer, vorneSpiegel, links und recht,Einziehbare Frontscheibe,Sonnenblende Dachfenster oder Windschutzscheibe,Kabinenheizung, ISO 1026,Einstellbarer Sitz, mit unabhängige Einstellung der Joystickkonsolen,Steuerung durch ergonomische und proportionale Joysticks,Benutzerfreundliches Bedienfeld (Keypad Tastatur), Startknopf und Drehgeber,Dieselanzeige, Anzeigen für Filterwechsel oder Systemfehler,Kabinenluftfilter und Sicherungskasten,7 "-Farbmonitor mit visuellen Anzeigen und Informationen sowie akustischem Alarm für Maschineneinstellungen. Einstellungenfür den Arbeitsmittelfluss (für Anbaugeräte)GESAMTPREISLISTE (MASCHINEN UND ZUBEHOR)OHNE MWST. IN EUR AB 01/07/2021, AB WERK ANNECY-LE-VIEUX (EXW)Dauerbetrieb für Haupthydraulikkreis (elektrische Zuschaltung).
2-JAHRES-/3000-STUNDEN-GARANTIE
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Mecalac Ausleger
[locale] => de
)
[it] => Array
(
[alt_content_1] =>
[alt_content_2] => TELAIO
TELAIO con struttura a X, cingoli in gomma 450 mm.
TRASMISSIONE IDROSTATICA INDIPENDENTE a circuito chiuso. Senso Drive.
2 MOTORIDUTTORI A 2 VELOCITÀ AUTOMATICHE: 5 km/h e 10 km/h, freni automatici.
AMMORTIZZATORE DI TENSIONE DELLA CATENA a molla con regolazione della tensione tramite sistema con serbatoio di grasso.
LAMA con sistema brevettato di assorbimento degli sforzi indotti dalla benna skid/4x1 (originale Mecalac) sulla lama in fase di
caricamento o di decapaggio.
MOTORE
MOTORE DEUTZ TD 2,9L 55 kW (75 hp), 4 cilindri, raffreddamento ad acqua, turbocompresso, conforme agli standard sulle emissioni EU Stage V e U.S. EPA Tier 4 Final. Con valvola EGR (ricircolo dei gas), DOC (catalizzatore di ossidazione diesel) e DPF (filtro antiparticolato diesel). Senza SCR e senza AdBlue. MINIMO AUTOMATICO: riduce automaticamente la velocità motore se nessuna funzione è sollecitata.
IDRAULICA
BLOCCO DISTRIBUTORE idraulico di tipo 7SX12, Active Control, con "Load Sensing" e "Flow Sharing".
POMPA DELL'EQUIPAGGIAMENTO a cilindrata variabile Rexroth 63 cm³, dedicata a equipaggiamento e rotazione.
POMPA DOPPIA DI TRASLAZIONE a cilindrata variabile Rexroth 2x 45 cm³.
MOTORE IDRAULICO DI ROTAZIONE: con freno automatico a disco e valvola ammortizzata, per rotazione totale a 360° della torretta.
EQUIPAGGIAMENTO
BRACCIO CON CINEMATISMO MECALAC, in 3 parti con pistone posizionatore, deporté incluso.
DEPORTÉ idraulico.
BILANCIERE: 1800 mm.
LINEA IDRAULICA AUSILIARIA PRINCIPALE proporzionale (comando proporzionale integrato nel manipolatore destro).
FUNZIONE PORTATA CONTINUA per gli attrezzi con movimento continuo.
SISTEMA DI ATTACCO RAPIDO REVERSIBILE BREVETTATO CONNECT, senza gancio, per benne e accessori meccanici, comandato dalla cabina (linee idrauliche e circuito inclusi).
VALVOLA DI SICUREZZA: martinetto del primo braccio dotato di una valvola di sicurezza.
Allarme sonoro di sovraccarico di serie con l'optional 3 o 4 valvole di sicurezza.
MODALITÀ DI UTILIZZO BREVETTATE
3 MODI DI UTILIZZO: Parking - Escavatore - Caricatore che permettono di adattare automaticamente le funzionalità della macchina al tipo di utilizzo.
IL MODO PARKING attiva il freno di stazionamento e blocca tutti i comandi della macchina.
IL MODO ESCAVATORE permette di guidare la macchina come un escavatore:
- Manipolatore sinistro: rotazione torretta e comando bilanciere
- Manipolatore destro: comando del primo braccio o del braccio intermedio e della benna.
IL MODO CARICATORE permette di guidare la macchina come una pala caricatrice cingolata:
- Manipolatore sinistro: traslazione e contro-rotazione
- Manipolatore destro: comando del sollevamento (braccio intermedio) e della benna.
Recupero della rotazione torretta col manipolatore sinistro. Possibilità di personalizzare tutti i modi e i comandi mediante un'unica interfaccia avanzata (rotella).
FUNZIONI INDIPENDENTI DI AIUTO AL LAVORO
LA FUNZIONE ACCOPPIAMENTO DEI MARTINETTI combina simultaneamente i movimenti dei martinetti del bilanciere e del braccio intermedio per consentire una guida simile a quella di un escavatore con braccio monoblocco.
LA FUNZIONE DI INVERSIONE DEL SENSO DI COMANDO DELLA BENNA permette di invertire il senso di apertura e chiusura della benna col manipolatore destro in modo da ritrovare lo stesso senso di comando di una pala caricatrice.
GESTIONE DEL REGIME MOTORE mediante un potenziometro che controlla direttamente il sistema di iniezione del motore termico.
LIMITATORE DI VELOCITÀ (SPEED CONTROL): funzione di gestione della velocità di traslazione. Consente di fissare una velocità massima, dalla più bassa alla velocità massima della macchina.
INGRASSAGGIO MANUALE RAGGRUPPATO: punti di ingrassaggio della sola torretta riuniti in una stessa sede.
CABINA
Retrovisore a destra e a sinistra, un faro di lavoro anteriore,
Cabina panoramica grande comfort, con visibilità totale a 360°. Omologata ROPS FOPS (griglia FOPS livello II di serie sul vetro del tetto),
Parabrezza anteriore ribaltabile totalmente o parzialmente, parasole per parabrezza e/o vetro del tetto,
Riscaldamento conforme alla norma ISO 10263, con numerose bocchette di aerazione indipendenti,
Consolle di sinistra inclinabile,
Comodo sedile adattabile alla morfologia dell'operatore, con regolazione lombare,
Regolazione indipendente dei braccioli supporto dei manipolatori,
Comandi servoassistiti con manipolatori ergonomici proporzionali,
Monitoraggio elettronico per verifica immediata del corretto funzionamento dei dispositivi di sicurezza e dell'operatività della macchina
Schermo a colori VGA da 7" con visualizzazione dei parametri della macchina, indicazioni visive e allarme sonoro di sicurezza. Regolazione e memorizzazione delle portate degli attrezzi,
Livello gasolio, spie per cambio di filtri o malfunzionamenti,
Interfaccia dei comandi intuitiva e versatile, encoder girevole, pulsante di avviamento,
Predisposizione per installazione di una radio,
Filtro aria cabina e scatola dei fusibili.
GARANZIA
2 anni / 3000 ore di garanzia, soggetta alle seguenti condizioni:
- Piano di manutenzione MECALAC rispettato ed eseguito dalla rete autorizzata MECALAC
- Utilizzo di ricambi MECALAC originali (inclusi Filtri e Lubrificanti**) ed esecuzione delle analisi lubrificanti.
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Euquipaggiamento polivalento Mecalac
[locale] => it
)
[es] => Array
(
[alt_content_1] =>
[alt_content_2] => Chasis portante central en X, orugas de goma de 450mm (18 pulgadas), transmisión hidrostática independiente - circuito cerrado.Senso Drive.Motores de 2 marchas, 2 marchas con cambio automático: 5 km/h (3 mph) y 10 km/h (6,2 mph), frenos automáticos, bloque depolea con ajuste de tensión a través del punto de engrase, cuchilla con sistema patentado para el absorbedor de restriccionesinducido al patín Mecalac y cuchara 4X1 en fase de carga o raspado
Motor DEUTZ TCD 2.9L 55 kW, 4 cilindros, refrigerado por agua,
turbocompreso,
Cumple las normas
de emisiones Stage V de la UE y U.S EPA Tier 4 Final.
Con válvula EGR
(recirculación de gases), DOC (catalizador de oxidación diésel) y DPF (filtro
de partículas diésel). No SCR, no AdBlue.
RALENTÍ AUTOMÁTICO:
entra automáticamente en ralentí si no se requiere ninguna función.
2 BOMBAS DE TRANSMISIÓN Rexroth (2 x 45 cm³),Motor hidráulico de giro de 360° con frenada de disco automático equipado con válvulas de alivio de presión antirrebote.BOMBA de ajuste variable dedicada al a la pluma/balancín y al giro (Rexroth 63 cm3). Distribuidor hidráulico tipo 7SX12 condetección de carga y reparto de caudal. Control activo.
PLUMA Y BALANCÍN, pluma de ajuste variable con desplazamiento estándar (3 piezas) y balancínVálvula de retención de seguridad anticaída de la pluma,Sistema patentado de enganche rápido hidráulico reversible
CONNECT (sin gancho) para el montaje de la cuchara y de lasherramientas desde la cabina (líneas hidráulicas y circuito incluidos), línea hidráulica principal proporcional auxiliar (mando en lapalanca de mano derecha). Alarma de sobrecarga estándar con 3 o 4 válvulas anticaída de seguridad opcionales.MODOS OPERATIVOS:Sistemas
PATENTADOS para el manejo de la máquina como cargadora o excavadora:- Modo excavadora: permite manejar la máquina como una excavadora:Funciones de giro y balancín en la palanca de mano izquierda + pluma y controles de la cuchara en la palanca de mano derecha.- Modo cargadora: permite manejar la máquina como una cargadora compacta con orugas:Transmisión y contrarrotación con la palanca de mano izquierda + pluma y controles de la cuchara en la palanca de manoderecha.OTRAS
FUNCIONES DE AYUDA AL MANEJO:- Inversión de la dirección de la cuchara: permite al operador invertir los controles de apertura y cierre de la cuchara con lapalanca de mano derecha cuando la cuchara está en posición invertida: permite al operador no cambiar sus hábitos de manejo- Función de acoplamiento de los cilindros de la pluma: sincroniza los dos cilindros de la pluma intermedia y el balancín para unamejor coordinación del movimiento de la pluma. Permite manejar esta pluma como si fuera una monopluma.Regulación de las revoluciones del motor mediante un potenciómetro que controla directamente el sistema de inyecciónSistema de engrase manual centralizado (puntos de engrase para el bastidor superior situados en el mismo lugar)
CABINA PANORAMICA, confortable, certificada ROPS-FOPS, con:Un faro de trabajo delantero y espejos a izquierda y derecha,Parabrisas delantero replegable parcial o totalmente,Parasol para la claraboya o el parabrisas delantero,Sistema de calefacción, conforme a la norma ISO 1026,Asiento regulable, con ajuste independiente de las consolas de palanca de mano,Controles mediante palancas de mano ergonómicas y proporcionales,Panel de control (teclado), botón de arranque y codificador rotativo de fácil manejo,Cabina preparada para la instalación de radio con altavocesMedidor diésel, indicadores de cambio de filtros o de fallos del sistema,Filtro de aire de cabina y caja de fusibles,Monitor a color de 7" con ajustes visuales, indicadores visuales y alarma acústica y de información. Configuración de los flujos dela herramienta de trabajo,Flujo continuo hidráulico estándar (a través de un interruptor) para herramientas con movimiento continuo
2 años de garantía / 3000 horas
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Versatile Mecalac attachment
[locale] => es
)
[pl] => Array
(
[alt_content_1] =>
[alt_content_2] =>
PODWOZIE
Podwozie: centralna rama "X" , szerokość gąsienic 450 mm, gąsienice gumowe
Niezależny napęd hydrostatyczny, układ zamknięty, Senso Drive
Dwa automatyczne, przekładniowe silniki jazdy: 5 km/h - 10 km/h z automatycznym hamulcem
Koło napinające z naciągiem gąsienic realizowanym przez punkt smarny
Lemiesz z opatentowanym systemem absorbującym siły przenoszone przez łyżkę ładowarkową typu SKID oraz 4x1 podczas ich pracy
SILNIK
DEUTZ TCD 2.9l 55kW (75 KM), spełniający normy emisji spalin EU Stage V i U.S
EPA Tier 4 Final turbodoładowany, 4 cylindry, chłodzony cieczą, zawór EGR
(recyrkulacja spalin), DOC, DPF, bez SCR I bez AdBlue.
Tryb AUTO IDLE:
automatycznie redukuje obrotowy silnika, jeżeli nie są aktywowane żadne funkcje
maszyny.
HYDRAULIKA
Główny rozdzielacz: aktywnie kontrolowany sygnałem LS i rozdziałem przepływu, 7SX-12
Główna pompa robocza: Rexroth wielotłoczkowa pompa o zmiennym wydatku 63 cm³
2 pompy jazdy: Rexroth 2 x 45 cm³
Hydrauliczny silnik obrotu 360 z automatycznym hamulcem i zaworem przeciążeniowym
WYSIĘGNIK
Wysięgnik w kinematyce MECALAC, trzy częściowy, zawierający łamaną część środkową (offset),
Łamanie środkowej części wysięgnika hydrauliczne (lewo/prawo)
Ramię kopiące: 1800 mm
Główna linia zasilająca na wysięgniku, proporcjonalna ( zintegrowana w prawy manipluatorze)
Stały przepływ w linii zasilającej dla osprzętu tego wymagającego
Opatentowane szbko złącze CONNECT dla podłączania osprzętu roboczego, bez haka
1 zamek bezpieczeństwa na siłowniku
Sygnał przeciążeniowy z opcjonalnymi 3 lub 4 zamkami bezpieczeństwa
OPATENTOWANE TRYBY PRACY
3 TRYBY ROBOCZE: parkinkg, koparka, ładowarka
Tryb parkingowy aktywuje hamulec i deaktywuje wszystkie funkcje maszyny
Tryb koparka umożliwia pracę maszyną jak koparką:
- lewy manipluator: obrót i siłownik wychyłu ramienia
- prawy manipulator: praca wysięgnikiem, siłownikiem wypychania i kopania
Tryb ładowarki umożliwa pracę maszyną jak ładowarką:
- lewy manipulator: napęd i jazda przeciwbieżna
- prawy manipulator: praca wysięgnikiem, siłownikiem wypychania i kopania
obrót realizowany z lewego manipulatora
Możliwość presonalizacji wszystkich nastaw operatorskich z poziomu panela sterowniczego
ASYSTENT PRACY, FUNKCJE NIEZALEŻNE:
Zespolenie działania siłowników: jednoczesne zespolenie działania siłownika wypychania i siłownika pośredniego, podobnie jak w działaniu wysięgnika koparek jednonaczyniowych (monoboom)
Odwrócenie łyżki: układ pozwalający na odwrócenie funkcji otwierania/zamykania osprzętu roboczego, zgodnie z przyzwyczajeniami operatora
Regulacja obrotów silnika przez pokrętło
Regulator prędkości: zarządza prędkością jazdy. Możliwa nastawa maksymalnej prędkości od bardzo wolnej do maksymalnej
Manualny układ smarowania: punkty smarne góry maszyny zlokalizowane w jednym miejscu
KABINA
Lewe i oprawe lusterko wsteczne, 1 światło LED na kabinie
Komfortowa kabina, panoramiczna, z widocznością dookoła. Norma FOPS-ROPS (kartownica na oknie dachowym jest standardem)
Przednia szyba w pełni uchylna, roleta przeciwsłoneczna na szybie i na oknie dachowym
Ogrzewanie wodne, ISO 10263 standard, z 6 niezależnymi kratkami nawiwowymi
Lewa konsola podnoszona
Komfortowy fotel operatora z regulacją
Niezależna regulacja konsol manipulatorów
Ergonomiczne manipulatory
Elktroniczny wyświetlacz do kontroli stanu funkcji maszyny i elementów bezpieczeństwa
7" VGA ekran dla wyświetlania sygnałów ostrzegawczych, parametrów roboczych. Nastawa przepływu w liniach zasilających z pozomu ekranu w kabinie.
Wskaźnik poziomu paliwa, wskaźnik poziomu zabrudzenia filtra lub występujących awarii
Panel z przyciskami, intuicyjny, pokrętło wyboru, przycisk start/stop
Przygotowanie pod montaż radia
Filtr powietrza kabiny, skrzynka z bezpiecznikami
GWARANCJA
2 lata /
3000 godzin, z zastrzeżeniem następujących warunków:
-
Wykonywanie przeglądów serwisowych zgodnie z DTR w autoryzowanym punkcie
serwisowym MECALAC.
-
Stosowanie oryginalnych części zamiennych MECALAC (w tym filtry i smary**)
oraz analiza środków smarnych.
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => wysięgnik Mecalac
[locale] => pl
)
[us] => Array
(
[alt_content_1] =>
[alt_content_2] =>
UNDERCARRIAGE
CHASSIS: Central X-frame undercarriage, 450mm (18 in) rubber tracks.
INDEPENDENT HYDROSTATIC TRANSMISSION, closed-circuit, Senso Drive.
TWO AUTOMATIC SHIFT 2-SPEED TRAVEL MOTORS: 5 kph -10 kph (3 mph - 6.2 mph), with automatic brakes.
IDLER BLOCK, with tension adjustment through greasing point,
BLADE, with patented system to absorb the constraints induced by the Mecalac skid & 4X1 buckets when loading or scraping.
ENGINE
DEUTZ TCD 2,9l 55 kW (75 hp) engine, meets EU Stage V and U.S EPA (Environmental Protection Agency) Tier 4 Final emission standards.
""Common rail"", turbocharged. With intercooler, 4 cylinders. Water cooled.
EGr valve (recirculation system), DOC (Diesel Oxidation Catalyst) and DPF (Diesel Particulate Filter, standard in Europe).
Fuel/water separator, diesel filter, engine oil filter and engine air cyclonic-type filter. Electric fuel priming pump.AUTO ENGINE LOW IDLE: automatically reduces the engine speed if no function is required.
HYDRAULICS
MAIN VALVE BLOCK: Active Control, with Load Sensing and Flow Sharing, 7SX12-type hydraulic distributor.
MAIN HYDRAULIC PUMP: Rexroth variable displacement pump (swing, boom/stick, working circuit), 63 cm³ (3.8 in³).
2 TRANSMISSION PUMPS: Rexroth variable displacement pumps, 2x 45 cm³ (2x 2.7 in³).
HYDRAULIC 360° SWING MOTOR: with automatic brake by disks equipped with anti-bounce pressure relief valve.
BOOM AND STICK
MECALAC BOOM KINEMATICS, 3-part variable adjustment boom, incl. offset boom.
OFFSET BOOM, hydraulic (left/right).
STICK: 1800 mm (5'10.8")
MAIN AUXILIARY HYDRAULIC LINE, proportional (proportional control integrated into the right joystick),
PERMANENT FLOW function for tools with a continuous movement.
PATENTED CONNECT REVERSIBLE HYDRAULIC QUICK COUPLER system, no hook, to mount buckets and tools from the cab (hydraulic lines and circuit included).
1x ANTI-DROP SAFETY VALVE on boom.
Standard overload alarm with the 3 or 4 safety anti-drop valves options.
PATENTED OPERATING MODES
3 OPERATING MODES: Parking, Excavator, and Compact Loader modes setting automatically the machine functions to the intended use.
THE PARKING MODE activates the parking brake and deactivates all driving and working functions.
THE EXCAVATOR MODE enables the machine to be operated like an excavator:
- Left joystick: swing and dipper stick control,
- Right joystick: boom or adjustable boom and bucket control.
THE LOADER MODE enables the machine to be operated like a compact track loader:
- Left joystick: Transmission and counter-rotations
- Right joystick: Lifting (intermediate boom) and bucket control.
Swing «recovery» capability with the left joystick
Possibility to CUSTOMIZE all user modes and control devices via one unique advanced user interface (rotary switch).
WORK ASSISTANCE, INDEPENDANT FUNCTIONS:
CYLINDERS COUPLING FUNCTION: simultaneously combines the stick and intermediate boom cylinders to allow a simplified operation of the front linkage, identical to an excavator that would be equipped with a monoboom.
BUCKET CONTROL INVERSION: enables the operator to reverse the bucket opening/closing controls of the right joystick when the bucket is in reversed position: allows the operator not to change his/her operating habits.
ENGINE SPEED CONTROL by encoder.
SPEED CONTROL: travel speed management function. Allows for setting a maximum travel speed, from very slow to the machine maximum speed.
MANUAL GREASING UNIT, CENTRALIZED: upperframe grease points located at the same place.
CAB
Left and right mirrors, 1x front work light,
Comfortble cab, panoramic, with all-around visibility. FOPS-ROPS certified (FOPS level II guard on roof window is standard),
Front windshield, completely or partially retractable, sunshade for windshield and/or cab roof window,
Water heating system, meets ISO 10263 standards, with several independent air vents,
Left Tilting console,
Comfortable seat, adjustable to the driver’s morphology. Lumbar adjustment,
Independent adjustment of the joystick consoles,
Controls assited by proportional ergonomic joysticks,
Electronic monitor for immediate checking of safety devices and machine functions,
7’’ VGA color screen monitor combining machine parameters, warning indicators and alarm. Work tools flows can be set and recorded from the monitor,
Diesel level gauge, indicators for filter replacement or system failures,
Soft-buttons panel, intuitive, jog-dial, start button,
Preparation for radio intallation,
Cab air filter and fuse box,
2 years warranty /3000 hours
[alt_label_1] =>
[alt_label_2] =>
[description] =>
[title] => Versatile Mecalac attachment
[locale] => us
)
)
)
)
[localized] =>
)